Jump to content

Up cycling


kissakai

Recommended Posts

The cabinet made that was shown on the NMB by Richard P a few weeks ago was superb. This is for us lesser mortals so not in Richards league but a nice project

I bought a coin cabinet that the draws were messed with and too small for tsuba so I needed to make all new draws. This was a cheap wat way to house a lot of tsuba

 

Images in the order shown.

1 - The bought coin cabinet with 24 draws

2 - The amateur way the draws had been messed with

3 - Initial test with plywood but due to the large hole is distorted so I used MDF

4 - Shows the old draw and my modified draw. My friend had 0.56 stainless he gave me for the backing plate

5 - The original handles were chrome screws so I bought beads that were only drilled half way. I needed two diameters for the csk screws and this is how I aligned the holes

6 - The felt should have had the cuts to allow the felt to fit into the recess but it just got too fiddly so I just forced the felt into the recess 

7 - The completed draw. I should have cut the felt slightly bigger than draw as when the felt was forced into the recess it pulled some of the felt away from the edge

8 - Stages of the draw build

9 - Finished cabinet that hold 98 tsuba

It was a snug fit that would have been better if I used 8mm MDF rather than 9mm

 

I tried to remove the last duplicated image but when I do it just comes back - what a pain!

 

 

34267565_Tsubacabinet(1).jpg.70c0126613cfc02df6d2b525387bd534.jpg

 

1273039394_Tsubacabinet(3).jpg.b07e6be15918ff9902b51438484047a6.jpg

 

1066849254_Tsubacabinet(5).jpg.75f6148300a6b04e2a091350267adac5.jpg

 

896467070_Tsubacabinet(4).jpg.d6b9340b094a279dcaed65ee090d056b.jpg

 

1263233547_Tsubacabinet(8).thumb.jpg.561feddc901e8938cc92ffaf0c54e2df.jpg

 

485544315_Tsubacabinet(11).JPG.28814b91cdbfe439151b99f4f65a08f3.JPG

 

1386356411_Tsubacabinet(13).JPG.cff8a8ed30899872e1bd1c265f0b2929.JPG

 

464818974_Tsubacabinet(14).JPG.866fa4869a7f07c697c845579a295d72.JPG

 

583241517_Tsubacabinet(16).thumb.jpg.8976aa254bf375d4efe5c74e3f5df295.jpg

 

 

 

 

Tsuba cabinet (1).jpg

  • Like 12
Link to comment
Share on other sites

excellent Grev, very good job!

I am also another fan of up cycling. I did my own version with an old cutlery canteen I won at auction very very cheap. I removed all the old linings and re-installed some new velour replacements, created some timber partitions and then sewed up some little fabric baggies (light blue shown under the guards). the front was "decorated" with a few metal Tsuba looking things too.

admittedly the Tsuba are on display most of the time, but it has been great for moving the collection or safe housing when needed.

not as nice as your own, but it does the job

cheers

RED333.jpg

RED001.jpg

RED002.jpg

RED004.jpg

RED005.jpg

  • Like 4
Link to comment
Share on other sites

Nice comments - thanks. I think upcycling can be done with very little skill as shown in my box. I forgot to say that I buy pre-glued felt as the first felt I glued myself but the glue showed through the felt - not nice

Nice box Stephen. Amy more upcycled items?

 

Now my cabinet has been completed I can remove some tsuba from my wall cabinets as they were way over crowded

These are ready to go back into my wall cabinets and look much better as there is more space to see them

CD.thumb.JPG.0325f50c5a36001a3fef301112e14317.JPG

 

This was my first box for carrying my tsuba and kozuka about especially to fairs. It was charity find children's tool box that I made draws for and added handles and veneer to the top. Soon it was too small but still usedful

822562579_CE(1).thumb.JPG.4083a4575733e248d2a6c2d216fd515e.JPG

 

626747837_CE(2).thumb.JPG.e19220c187d85443b8f0b55107f2dc38.JPG

 

Second cabinet was a cheap eBay buy that was very poorly made. First a rub down, a light stain then and added the partitions. These hold my for sale tsuba and I take it to fairs as it holds loads of tsuba

701599730_CE(3).thumb.JPG.d60b95856fd5e4d9e014517038cd4e93.JPG

 

  • Like 3
Link to comment
Share on other sites

I love it Grev, well done. I'm very passionate about up cycling, I have have literally hundreds of examples I've done, although I don't have pictures of many on hand (two pictured below though), I have done at least 5 other storage boxes for Tsuba sized collections. I don't want to deviate this thread from your excellent drawer, but one of the last up cycles I've done has been for my wife. I won a 1910 Australian Wertheim piano, but full restoration was prohibitively expensive, so instead of re-selling for parts or scrap, I decided to retro fit a new casio s150 digital Piano into it. Up cycling an old piano to a newer old piano??

 

20210509_114859.jpg

xx10009.jpg

xx10010.jpg

  • Like 2
Link to comment
Share on other sites

This thread is quite old. Please consider starting a new thread rather than reviving this one, unless your post is really relevant and adds to the topic..

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...